Network Setup; Configuring The Wired Network - Kyocera ECOSYS PA6000 Series Operation Manual

Installing and Setting up the Machine > Network Setup

Network Setup

Configuring the Wired Network

The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP
(IPv4), TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other
platforms.
Set up TCP/IP (IPv4) to connect to the Windows network.
Configuration Method
Configuring the Connection
from the Operation Panel on
This Machine
Configuring Connections on
the Web Page
Setting the Connection by
Using the Setup Utility of
IB-50
NOTE
When you want to switch to the network interface other than Wired (default) after installing an optional
Network Interface Kit (IB-50) and a Wireless Network Interface Kit (IB-37/IB-38/IB-51), select the desired setting
on "Primary Network".
Primary Network (page 8-26)
Be sure to connect the network cable before configuring the settings.
Connecting LAN Cable (page 2-7)
For other network settings, refer to the following:
Network (page 8-15)
Configuring the wired network settings from System menu.
For the equipped network interface, the connection can be set by
using Command Center RX. For the optional IB-50, the
connection can be set by using the dedicated Web page.
This is the setup tool included in the CD of IB-50. You can use it
on Windows.
Description
2-16
Reference Page
IPv4 setting (page 2-17)
Command Center RX
User Guide
IB-50 Operation Guide
IB-50 Operation Guide