Edit Remote Route Entry Panel - HP StorageWorks P9000 Reference Manual

Figure 47 Edit Route Entry Panel
Table 39 (page 58)
Table 39 Contents of the Edit Route Entry Panel
Item
AC
Device Address Domain
Storage System S/N
Device Number
If Enter is pressed while the Edit Route Entry panel is displayed, the information for the entry is
changed as specified, and the display returns to the Entire Route Information panel.

Edit Remote Route Entry Panel

If e is specified for AC in the Entire Route Information panel, then the Edit Remote Route Entry panel
is displayed to update information for entries added for remote scan.
Figure 48 (page 58)
Figure 48 Edit Remote Route Entry Panel
Table 40 (page 59)
58 ISPF Panels
describes the items in the Edit Route Entry panel.
Description
Specify an action.
s—Use when you do not want to manually enter a combination of the DAD
ID and storage system serial numbers, or enter a command device, but you
do want to select them from a list instead. When you specify this in either
Device Address Domain or Storage System S/N, the Storage System/DAD
Selection List panel is displayed. When you specify this in Device Number,
the Define Command Device panel is displayed.
DAD ID within the route (modifiable).
The first DAD ID of the route cannot be changed.
Serial number of the storage system to which the command device belongs
(modifiable)
Device number of the command device (modifiable)
shows the Edit Remote Route Entry panel.
describes the items in the Edit Remote Route Entry panel.