Table 33 Select the Sort Key for the Sort the Define Command Device Panel
Item
CU
CCA
Device Number
Volume Serial Number
Edit APID Panel
If e is specified in AC in the Route Information panel, the Edit APID panel is displayed to change
the APID.
Figure 42 (page 53)
Figure 42 Edit APID Panel
Table 34 (page 53)
Table 34 Contents of the Edit APID Panel
Item
Supply new APID for DADID
APID
Entire Route Information Panel
When e is specified in AC in the Route Config panel, the Entire Route Information Panel displays
all entries that are defined in the route list from the Route Config panel.
The Entire Route Information panel is shown in
Sorted by
Number of the CU to which the command device belongs
CCA of the command device
Device number of the command device
Volume serial number of the command device
shows the Edit APID panel.
describes the items in the Edit APID panel.
Description
DAD ID to change the APID
Specify a new APID (0000-FFFF).
Do not press Enter when specifying a nonhexadecimal value.
In the initial status, APIDs already assigned are displayed.
Discover/Define Configuration Panel (Configuration File Definition)
Figure 43 (page
54).
53