Replacing The Top Cover On A Pedestal-Mounted Server; Removing The Top Cover On A Pedestal-Mounted Server; Top Cover Alignment Mark - HP rp3440 Service Manual

Figure 3-12 Removing the Top Cover on a Pedestal-Mounted Server
4. Remove the top cover.
CAUTION:
internal components. Operating the server with the cover removed can cause the server to
quickly overheat.

Replacing the Top Cover on a Pedestal-Mounted Server

CAUTION:
replacement of the cover.
To replace the top cover, follow these steps:
1. Align the front edge of the top cover with the alignment mark on the optical drive bay.
Figure 3-13 Top Cover Alignment Mark
58 Installing the System
The server depends on the access panels being closed for proper cooling of
Secure any wires or cables in the server so they do not get cut or interfere with the