Removing The Front Bezel On A Pedestal-Mounted Server; Aligning The Pedestal Front Bezel - HP rp3440 Service Manual

1. Use the indentation at the top edge of the bezel to pull the bezel away from the chassis and
to a 45-degree angle.
Figure 6-14 Removing the Front Bezel on a Pedestal-Mounted Server
2. Lift the bezel off the mounting tabs and away from the chassis.
Replacing the Front Bezel on a Pedestal-Mounted Server
To replace the front bezel, follow these steps:
1. Position the bezel at an approximate 45-degree angle and align the retaining slots at the
bottom with the retaining tabs on the chassis. Press the bezel against the chassis to engage
the tabs.
Figure 6-15 Aligning the Pedestal Front Bezel
Removing and Replacing Server Covers and Bezel 135