System Specifications; System Configuration; Dimensions And Values; Server Dimensions And Values - HP rp3440 Service Manual

User service guide, sixth edition - hp 9000 rp3410/rp3440
Hide thumbs Also See for rp3440:
Table of Contents

Advertisement

2 System Specifications

This chapter provides information on the basic system configuration, physical specifications,
and requirements for the HP 9000 rp3410 or rp3440 server.

System Configuration

Table 2-1
lists the minimum and maximum configuration options for the HP 9000 rp3410 and
rp3440 servers.
Table 2-1 Minimum and Maximum System Configurations
Component
Microprocessors
Memory
HDDs
SCSI
LAN
PCI slots
Core I/O
DVD
External storage
Power supply

Dimensions and Values

Table 2-2
lists dimensions and values of the HP 9000 rp3410 and rp3440 servers.
Table 2-2 Server Dimensions and Values
Dimension
Rack dimensions (depth x width x height)
Pedestal dimensions (depth x width x height)
Rack weight
Pedestal weight
rp3410
One dual processor module with one or two
PA RISC processors enabled. Each processor
is 800 MHz/1.5 MB cache with 32 MB or 64
MB L2 cache.
Supports up to 12 double data rate (DDR)
registered ECC memory, in PC2100 DIMMs.
Maximum memory capacity is 6 GB.
Supported DDR DIMM sizes: 256 MB, 512
MB, and 1 GB.
Three 36 GB, 15K RPM Ultra320 SCSI
hot-plug disks or three 73 GB, 15K RPM
Ultra320 SCSI hot-plug disks or three 146
GB, 10K RPM Ultra320 SCSI hot-plug disks.
Integrated Ultra-3 SCSI dual-channel
controller; 80 MB/s transfer rate with one
internal 68-pin connector and one external
68-pin connector.
PCI GB, fast Ethernet controller.
Two 64-bit PCI-X slots, 133 MHz, 3.3V slots.
One serial port, four USB 2.0 ports,
integrated RJ-45 LAN on iLO MP card.
None.
Optional.
One 650W power supply. You can install a
second power supply to provide redundant
(N+1) capability.
rp3440
One or two dual processor modules each
containing two PA RISC processors. Each
processor is 800 MHz/1.5 MB cache or 1
GHz/1.5 MB with 32 MB or 64 MB L2 cache.
Supports up to 12 double data rate (DDR)
registered ECC memory, in PC2100 DIMMs.
Maximum memory capacity is 32 GB if 4 GB
DIMMs are used. Supported DDR DIMM
sizes: 256 MB, 512 MB, 1 GB, 2 GB, and 4 GB.
Three 36 GB, 15K RPM Ultra320 SCSI hot-plug
disks or three 73 GB, 15K RPM Ultra320 SCSI
hot-plug disks or three 146 GB, 10K RPM
Ultra320 SCSI hot-plug disks.
Integrated Ultra-3 SCSI dual-channel
controller; 80 MB/s transfer rate with one
internal 68-pin connector and one external
68-pin connector.
PCI GB, fast Ethernet controller.
Four 64-bit PCI-X slots, 133 MHz, 3.3V slots.
One serial port, four USB 2.0 ports, integrated
RJ-45 LAN on iLO MP card.
IDE interface; 48x speed.
Optional.
One 650W power supply. You can install a
second power supply to provide redundant
(N+1) capability.
Values
26.8 in (67.9 cm) max. x 19.0 in (48.3 cm) x3.4 in (8.6 cm)
26.6 in (67.5 cm) x 11.6 in (29.5 cm) x 19.5 in (49.4 cm)
Minimum: 38.6 lbs (17.5 kg)
Maximum: 49.0 lbs 22.2 kg
Minimum: 49.4 lbs 22.4 kg
Maximum: 56.3 lbs 25.5 kg
System Configuration
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9000 rp34109000 rp3440-49000 rp3440

Table of Contents