Replacing A System Board; System Product Number, System Serial Number, Key Certificate - HP rp3440 Service Manual

Figure 6-73 System Product Number, System Serial Number, Key Certificate

Replacing a System Board

You must perform the following procedure to ensure all components in the server are functional.
To replace the system board, follow these steps:
1. Remove the system board. (See
2. Replace the system board with the replacement system board. (See
Board" (page
3. Power the system on.
4. At the BCH prompt, enter the SER command. This puts you into the service menu.
5. At the service menu prompt, enter the INIT command.
NOTE:
6. When prompted, enter the product number located on the pull-out tag. Confirm by answering
Y when asked. If you made a mistake entering the product number, you can answer Nand
re-enter the product number when asked.
7. Enter the system serial number when prompted. If you accidentally hit return without
entering the system serial number, you will have a default value. Confirm the original serial
number by entering Y when asked. If you made a mistake entering the serial number, you
can enter N and re-enter the serial number when asked.
8. If your product is a one processor 800MHz CPU, skip steps 9-12 and go to step 13 to reset
your server.
9. At the service menu prompt, enter upgrade. The system asks you for the system serial
number.
10. Enter the system serial number from the pull-out tag.
11. Enter the key from the key certificate that is on the back side of the pull-out tag. The key
certificate number and system serial number are a pair and must be used together. If you
do not enter the correct key certificate number, the server components will not function.
12. The screen displays the current system value (rp3410 DC--) and the original upgraded system
value. You will be prompted with the question "Do you wish to continue with this change?"
Answer Y to confirm the change.
13. Enter reset to reboot the server. perform the resetting with the changes in effect.
180).)
The INIT command only works on the repair board.
Replacing the Resident System Board with a Replacement System Board
"Removing the System Board" (page 177).)
"Replacing the System
185