Service Menu; Display Command; Scsi Command; Productnum Command - HP rp3440 Service Manual

Service Menu

The Service menu commands are used by service personnel to view information about the system
for the purpose of system service operations.
Main Menu: Enter command or menu > ser
---- Service Menu ------------------------------------------------------------
Command
-------
CLEARPIM
SCSI [option] [<path>] [<val>]
MemRead <address> [<len>]
PDT [CLEAR]
PIM [<proc>] [HPMC|LPMC|TOC]
ProductNum <O|C> [<number>]
ScRoll [ON|OFF]
SELftests [ON|OFF]
BOot [PRI|ALT|<path>]
DIsplay
HElp [<command>]
RESET
MAin
----
Service Menu: Enter command >

Display Command

The DI command redisplays the current menu.

SCSI Command

The SCSI command displays and sets the SCSI controller parameters, such as initiator ID and
speed. The OS device drivers use these parameters to program the controller.
NOTE:
These values are only suggested by the device driver; the actual values programmed
into the controller can be different.

ProductNum Command

The ProductNum command configures the original or current product number. The software
ID (SWID) does not get updated automatically when the original product number changes, but
you can manually update the SWID by resetting the system with the reset command.

iLO MP

The Integrated Lights-Out Management Processor (iLO MP) for entry-level PA-RISC is an
autonomous management subsystem embedded directly on the server. It is the foundation of
server High Availability (HA), embedded server, and fault management. It also provides system
administrators secure remote management capabilities regardless of server status or location.
The iLO MP is available whenever the system is connected to a power source, even if the server
main Power button is in the off position.
For complete information on the iLO MP, see the HP Integrity and HP 9000 iLO Operations Guide
on the HP website at http://h20000.www2.hp.com/bizsupport/TechSupport.
Description
-----------
Clear (zero) the contents of PIM
Display or set SCSI controller values
Read memory and I/O locations
Display or clear the PDT
Display PIM information
Display or set Product Number
Display or change scrolling ability
Enable/disable self test execution
Boot from specified path
Redisplay the current menu
Display help for specified command
Restart the system
Return to Main Menu
iLO MP 203