Additional Controls And Indicators; Hot-Pluggable Disk Drive Indicators; Optional Removable Media Drive; Hot-Pluggable Disk Drive Led Indicators - HP rp3440 Service Manual

Additional Controls and Indicators

HP 9000 rp3410 and rp3440 servers can have up to three low-voltage differential (LVD), 3.5-inch
form factor hot-pluggable disk drives installed. These disk drives have LEDs that provide status
and activity information.

Hot-Pluggable Disk Drive Indicators

The disk drives have two LEDs per drive, as follows:
Status LED
Activity LED
Figure 1-9 shows the hot-pluggable disk drive LED indicators.
Figure 1-9 Hot-Pluggable Disk Drive LED Indicators
Table 1-8 lists the hot-pluggable disk drive LED definitions.
Table 1-8 Hot-Pluggable Disk Drive LED Definitions
LED
Status LED
Activity LED

Optional Removable Media Drive

HP 9000 rp3410 and rp3440 servers are delivered without a removable media drive. You can add
either a DVD or CD-RW/DVD drive. Each of these optional devices has one activity LED.
Figure 1-10 shows the DVD drive details.
Figure 1-10 DVD Drive
Table 1-9 lists the DVD drive LED definitions.
Table 1-9 DVD Drive LED Definitions
LED
Activity LED
Not used on the HP 9000 rp3410 or rp3440 server.
Flashing green and indicates disk drive activity.
This LED is directly controlled by the disk drive and turns on when a drive
is accessed.
State
None
Flashing green
State
Flashing green
Description
Not used
Reading and scanning hard drive
Description
Drive is active
Controls, Ports, and LEDs 33