Replacing The Top And Side Covers On A Pedestal-Mounted Server; Removing The Top Cover On A Pedestal-Mounted Server - HP rp3440 Service Manual

3. Remove the top cover.
Figure 6-10 Removing the Top Cover on a Pedestal-Mounted Server
a. Turn the top cover lock keyswitch to the unlocked position.
b. Rotate the blue release handle to release the latch.
c. Slide the top cover toward the back of the chassis and lift it off.
CAUTION:
internal components. Operating the server with the side cover removed can cause the server
to quickly overheat.

Replacing the Top and Side Covers on a Pedestal-Mounted Server

CAUTION:
the replacement of the cover.
To replace the top and side covers, follow these steps:
132 Removing and Replacing Components
The server depends on the access panels being closed for proper cooling of
Secure any wires or cables in your server so they do not get cut or interfere with