Rear Panel; Rear View; Rear Panel Connectors And Switches - HP rp3440 Service Manual

Rear Panel

The rear panel of the HP 9000 rp3410 and rp3440 servers includes communication ports, I/O
ports, AC power connector, and the locator LED/button. Additional LEDs located on the rear
panel of the HP 9000 rp3410 and rp3440 servers signal the operational status of:
• 10/100/1000 Base-T Ethernet LAN
• iLO MP card LAN
Figure 1-11 shows the rear panel ports and LEDs.
Figure 1-1 1 Rear View
Table 1-10 lists the rear-panel connectors and switches.
Table 1-10 Rear Panel Connectors and Switches
Connector or Switch
AC power
LVD/SE SCSI
(1 GB) 10/100/1000 LAN
Serial A (console) and
Serial B
USB
TOC
Locator Button and LED
Video (not used)
Console/remote/UPS
10/100 iLO MP LAN
34 Overview
Function
Primary power connection for the server.
68-pin, low-voltage differential, single-ended U160 SCSI. This connector provides external
SCSI connection on SCSI Channel B.
10/100/1000 base-T Ethernet LAN connector.
9-pin male serial connectors – factory use only.
Four universal serial bus (USB 2.0) connectors.
Transfer of Control button. Halts all system processing and I/O activity and restarts the
system.
The Locator button and LED are used to help locate a server within a rack of servers.
When the button is engaged, the blue LED illuminates and an additional blue LED on
the front panel of the server illuminates. You can remotely activate this function.
15-pin female video connector. DISABLED—DO NOT USE. To enable video capability,
you must obtain the supported A6150 video PCI card. See enclosed ReadMe, A6150-90001.
25-pin female serial data bus connector for the iLO MP card.
10 Mb/100 Mb LAN connector for the iLO MP.