Removal And Replacement Procedures Preliminary Requirements; Tools Required; Service Considerations; Plastic Parts - HP mt44 Maintenance And Service Manual

4 Removal and replacement procedures
preliminary requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
Phillips P0 screwdriver
●
Torx T8 screwdriver
●
Non-marking plastic pry tool
●

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying
screws) away from the work area to prevent damage.

Plastic parts

CAUTION:
when handling the plastic
28 Chapter 4 Removal and replacement procedures preliminary requirements
Using excessive force during disassembly and reassembly can damage plastic parts. Use care