Setting The Active Port; Setting The Activation Of Redundant Port Field; Setting The Revert To Primary Port Field - Enterasys VHSIM2-A6DP User Manual

ATM Port Redundancy Configuration Screen

3.10.3 Setting the Active Port

To set the Active port, perform the following steps:
1. Use the arrow keys to highlight the Active port field.
2. Enter 1 or 2. Entering 1 signifies APIM 1 of the VHSIM2-A6DP. Entering 2 signifies APIM 2
of the VHSIM2-A6DP.
NOTE: This field may be configured manually to "1" or "2", however, it is possible this
value may change if the Activation of redundant port or Revert to primary port fields are
set to "Automatic".
3. Use the arrow keys to highlight the SAVE command at the bottom of the screen and press
ENTER. The changes are saved to memory.

3.10.4 Setting the Activation of Redundant Port Field

To set the Activation of redundant port field (automatic or manual), perform the following steps:
1. Use the arrow keys to highlight the Activation of redundant port field.
2. Press the SPACE bar to toggle between the choices until the appropriate mode displays
(Automatic or Manual).
NOTE: If the Activation of redundant port field is set to Manual, the redundant port must
be activated by the user via Local/Remote Management.
3. Use the arrow keys to highlight the SAVE command at the bottom of the screen and press
ENTER. The changes are saved to memory.

3.10.5 Setting the Revert to Primary Port Field

To set the Revert to Primary port field (Automatic or Manual), perform the following steps:
1. Use the arrow keys to highlight the Revert to Primary port field.
2. Press the SPACE bar to toggle between the choices until the appropriate mode displays
(Automatic or Manual).
3-34 Local Management