Setting Up Using the Setup Guide
When the machine is turned on (
assist you to configure the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the
setting screens are displayed in the following order.
Step 1
Set the language to be displayed on the operation panel screen or in reports, as well as the
country or region where the machine will be used.
Step 2
Adjust the machine's date/time.
Step 3
Set a PIN to access the Remote UI. Because the Remote UI can be used to change the machine
settings from a computer, setting of a PIN is recommended.
Step 4
Configure the settings to connect to the network using the wireless LAN.
Turning ON the Machine(P. 76) ) for the first time, the Setup Guide starts up to
Setting the Display Language and the Country or Region
1
Select a language.
2
Select a country or region.
Setting the Date and Time
1
Select a time zone.
What is UTC?
●
Coordinated Universal Time (UTC) is the primary time standard by which the
world regulates clocks and time. The correct UTC time zone setting is required
for Internet communications.
2
Enter the date and time, and press
Setting the Access Security Measures
1
Select <Yes>.
●
If you select <No>, PIN is not set, and the Setup Guide proceeds to step 4.
●
You can also set the access security measure of the Remote UI later.
Setting a Remote UI PIN(P. 134)
2
Enter the PIN, and then select <Apply>.
3
Enter the same PIN, and then select <Apply>.
Setting the Wireless LAN
1
Select <Yes>.
●
Select <No> to finish the Setup Guide without configuring the wireless LAN
settings. Read the displayed message, and press
2
Select <OK>.
3
Select the setting method.
●
For more information about the wireless LAN settings, see
Wireless LAN(P. 24) .
Setting Up
.
18
27WS-00A
.
Connecting to a