Drive Unit; Before Removing The Drive Belt; Removing The Drive Belt - Canon LBP3250 Series Service Manual

Chapter 3
4) Remove the 2 projections [3] from the 2 boss holes [2] at both sides (left
and right) to remove the pickup tray unit [4].
[3]
[2]
[1]

3.1.8 Drive Unit

3.1.8.1 Before Removing the Drive Belt

1) Remove the upper cover. (page 3-2)Reference[Removing the Upper
Cover]
2) Remove the right cover. (page 3-1)Reference[Removing the Right Cov-
er]

3.1.8.2 Removing the Drive Belt

1) Remove the tension unit [1].
- 1 screw [2]
2) Remove the drive cover [1].
- 4 screws [2]
Point to Note at Installation
When removing the 4 screws [1], be sure to hold the drive cover [2] with
your hand to remove (because the spring [3] in the drive cover can be lost).
3-4
[2]
[3]
[4]
F-3-11
[1] [2]
F-3-12
[1]
0019-7810
0019-7811
3) Remove the 2 gears [1].
4) Remove the drive belt [1].
[1]
[3]
[1] [3]
[2]
[2]
F-3-13
F-3-14
[2]
[1]
[1]
[1]
[1]