CHAPTER 4 IMAGE FORMATION SYSTEM
4) Remove the three screws
5. Detaching the Blank Shutter Solenoid
1) Detach the blank exposure assembly.
2) Detach the blank shutter upper plate, and disconnect the connector
Detaching the Blank Exposure Assembly on p. 4-34.")
3) Remove the E-ring
4) Remove the two screws
4-36
, and detach the blank exposure lamp
Figure 4-312
, and detach the link arm
, and pull out the blank shutter solenoid.
Figure 4-313
COPYRIGHT © 1997 CANON INC.
from the blank shutter.
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
. (See "3.