Mirror Positioning Adjustment - Canon GP160DF Service Handbook

4.

Mirror positioning adjustment

a) Adjusting position of No. 2 mirror mount
If the optical section wire pulley's hexagonal fixing nut has been loosened, follow the
procedures described below to adjust the position of the No. 2 mirror mount, and then
tighten the hexagonal nut.
The mirror positioning tool used in the positioning of the No. 2 mirror mount is illus-
trated below.
[3]
[2]
FY9-3009-040 (for rear use)
[B]
[A]
FY9-3009-040 (for front use)
Optical section wire pulley
Hexagonal nut
Figure 2-4
[C]
[B]
[A]
[3]
[1]
[C]
[3]
[2]
[1]
Figure 2-5
CHAPTER 2 STANDARDS AND ADJUSTMENTS
[A]
[2]
[1]
When used to adjust the No. 2 mirror mount
(for rear use)
[C]
[B]
[1]
When used to adjust the No. 2 mirror mount
(for front use)
[C]
[B]
[2]
2-3