Serial Port Selection Menu; Serial Port Speed Setup Menu - IBM 7026-H80 - RS/6000 - 256 MB RAM Service Manual

Serial Port Selection Menu

This menu allows you to enable or disable the call-in and call-out functions of each
serial port in any combination.
1. Serial Port 1 Call-Out:
2. Serial Port 2 Call-Out:
98. Return to Previous Menu
Call-in and ring-indicate power-on cannot be enabled at the same time. If ring-indicate
power-on is already enabled and you try to enable call-in, a message prompts you for
confirmation. Refer to the message displayed on the screen.

Serial Port Speed Setup Menu

This menu allows you to set serial port speed to enhance terminal performance or to
accommodate modem capabilities.
1. Serial Port 1 Speed:
2. Serial Port 2 Speed:
98. Return to Previous Menu
1>
A serial port speed of 9600 baud or higher is recommended. Valid serial port speeds
are as follows:
50
75
110
134
150
300
Serial Port Selection Menu
Currently Disabled
Currently Disabled
Serial Port Speed Setup Menu
Currently 9600
Currently 9600
600
1200
1800
2000
2400
3600
3. Serial Port 1 Call-In:
Currently Disabled
4. Serial Port 2 Call-In:
Currently Disabled
Chapter 7. Using the Service Processor
4800
7200
9600
19200
38000
57600
115200
393