Table of Contents
Advertisement
1.
Configuration dependent, base rack weight plus the weight of the drawers mounted in the
rack. The rack can support up to a maximum weight of 35 lbs/EIA (Unit).
2. The total rack power should be derived from the sum of the power used by the drawers in the
rack.
3. The Power Distribution Panel (PDP) on the DC powered rack can hold up to eighteen (nine
per power source) 48 volt 20 to 50 amp circuit breakers (configuration dependent). Each
power source supports up to 8.4 kVA.
4. Each AC Power Distribution Bus (PDB) can supply 4.8 kVA. A rack can have up to four PDB's
as required by the drawers mounted in the rack.
Chapter 1. Reference Information
61
Advertisement
Table of Contents
