IBM 7026-H80 - RS/6000 - 256 MB RAM Service Manual page 312

Table 6. Service Processor Error Codes. (continued)
294
Service Guide
Error Code Description
450E 288D Memory system and scan control
routines detected memory riser fault
450E 2A00 Memory system and scan control
routines detected 6W processor fault
450E 300A Memory system and scan control
routines detected 32MB DIMM fault
450E 300B Memory system and scan control
routines detected 128MB DIMM fault
450E 300C Memory system and scan control
routines detected 256MB DIMM fault
450E 300D Memory system and scan control
routines detected 512MB (Stacked)
DIMM fault
450E 300E Memory System and scan control
routines detected 512MB (unstacked)
DIMM fault
450E 301F Memory System and scan control
routines detected 128MB DIMM fault
Action/
Possible Failing FRU
1. Go to service processor memory
configuration/deconfiguration
menu to verify memory DIMMs
state. See "Memory
Configuration/Deconfiguration
Menu" on page 384 for more
information.
2. Memory riser card
Locations:
U1.1-P1-M1
U1.1-P1-M2
Processor card
Location: U1.1-P1-C1
Memory DIMM
Locations:
U1.1-P1-M1.n
U1.1-P1-M2.n
U1.1-P1-C1-Mn
Memory DIMM
Locations:
U1.1-P1-M1.n
U1.1-P1-M2.n
U1.1-P1-C1-Mn
Memory DIMM
Locations:
U1.1-P1-M1.n
U1.1-P1-M2.n
U1.1-P1-C1-Mn
Memory DIMM
Locations:
U1.1-P1-M1.n
U1.1-P1-M2.n
U1.1-P1-C1-Mn
Memory DIMM
Locations:
U1.1-P1-M1.n
U1.1-P1-M2.n
U1.1-P1-C1-Mn
Memory DIMM
Locations:
U1.1-P1-M1.n
U1.1-P1-M2.n
U1.1-P1-C1-Mn