Table of Contents
Advertisement
Call-In/Call-Out Setup Menu
This menu is used to configure a modem for the service processor to use to support the
system:
1. Modem Configuration Menu
2. Serial Port Selection Menu
3. Serial Port Speed Setup Menu
4. Telephone Number Setup Menu
5. Call-Out Policy Setup Menu
6. Customer Account Setup Menu
7. Call-Out Test
98. Return to Previous Menu
99. Exit from Menus
1>
v Modem Configuration Menu, see "Modem Configuration Menu" on page 392.
v Serial Port Selection Menu, see "Serial Port Selection Menu" on page 393.
v Serial Port Speed Setup Menu, see "Serial Port Speed Setup Menu" on page 393.
v Telephone Number Setup Menu, see "Telephone Number Setup Menu" on
page 394.
v Call-Out Policy Setup Menu, see "Call-Out Policy Setup Menu" on page 395.
v Customer Account Setup Menu, see "Customer Account Setup Menu" on
page 396.
v Call-Out Test Menu tests the configuration after the modem is installed and
configured. In order for this test to execute successfully, at least one of the following
numbers must be assigned:
– Service center telephone number
– Customer administration center telephone number
– Digital pager telephone number
CALL-IN/CALL-OUT SETUP MENU
Chapter 7. Using the Service Processor
391
Advertisement
Table of Contents
