Mounting And Grounding The Access Point - Cisco Aironet 2802E Getting Started Manual

9

Mounting and Grounding the Access Point

Cisco Aironet 2800 series access points can be mounted in several configurations – on a suspended
ceiling, on a hard ceiling or wall, on an electrical or network box, and above a suspended ceiling.
Go to the following URL for access point mounting instructions:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mounting/guide/apmount.html
The standard mounting hardware supported by the AP is listed in
Table 1 Brackets and Clips for Mounting the AP
Part Number
1
Brackets AIR-AP-BRACKET-1
AIR-AP-BRACKET-2
Clips AIR-AP-T-RAIL-R
AIR-AP-T-RAIL-F
AIR-CHNL-ADAPTER
1. Mount the AP using no less than four screw holes on a bracket.
When mounting the AP in areas where there is a possibility of the AP being knocked off the mounting
bracket, use the lock hasp on the back of the AP (see
Description
Low-profile bracket
(This is the default option)
Universal bracket
Ceiling Grid Clip (Recessed mounting)
(This is the default option)
Ceiling Grid Clip (Flush mounting)
Optional adapter for channel-rail ceiling grid profile.
Figure
Table 1.
7) to lock it to the bracket.
19