Removing Switch Components; Installing And Removing J-Ex4200 Switch Hardware Components - Dell PowerConnect J-EX4200 Hardware Manual

CHAPTER 13

Removing Switch Components

Installing and Removing J-EX4200 Switch Hardware Components

Installing and Removing J-EX4200 Switch Hardware Components on page 139
Removing a Power Supply from a J-EX4200 Switch on page 140
Removing a Fan Tray from a J-EX4200 Switch on page 141
Removing an Uplink Module from a J-EX4200 Switch on page 142
Removing a Transceiver from a J-EX Series Switch on page 144
Disconnecting a Fiber-Optic Cable from a J-EX Series Switch on page 146
Disconnecting a Virtual Chassis Cable from a J-EX4200 Switch on page 147
Replacing a Member Switch of a Virtual Chassis Configuration (CLI
Procedure) on page 148
Removing a Cage Nut from a Rack on page 150
The J-EX4200 switch chassis is a rigid sheet-metal structure that houses the hardware
components. The field-replaceable units (FRUs) in J-EX4200 switches are:
Power supply
Fan tray
Uplink module
SFP transceiver
SFP+ transceiver
The power supply, fan tray, uplink module, and transceivers are hot-removable and
hot-insertable: You can remove and replace them without powering off the switch or
disrupting switch functions.
To install a power supply in a J-EX4200 switch, follow instructions in "Installing a Power
Supply in a J-EX4200 Switch" on page 106. To remove a power supply, follow instructions
in "Removing a Power Supply from a J-EX4200 Switch" on page 140.
To install a fan tray in a J-EX4200 switch, follow instructions in "Installing a Fan Tray in
a J-EX4200 Switch" on page 107. To remove a fan tray, follow instructions in "Removing
a Fan Tray from a J-EX4200 Switch" on page 141.
139