Power Over Ethernet (Poe) Ports; J-Ex4200 Switch Models; Chassis Physical Specifications For J-Ex4200 Switches - Dell PowerConnect J-EX4200 Hardware Manual

Power over Ethernet (PoE) Ports

Related
Documentation

J-EX4200 Switch Models

Table 4: J-EX4200 Switch Models
Model Ports
J-EX4200-24T 24 Gigabit Ethernet
J-EX4200-48T 48 Gigabit Ethernet
J-EX4200-24F 24 small form-factor pluggable
(SFP) transceivers
Related
Documentation

Chassis Physical Specifications for J-EX4200 Switches

Table 5: Physical Specifications of the J-EX4200 Switch Chassis
Description
Chassis height
an access switch to a distribution switch or to interconnect member switches of a Virtual
Chassis across multiple wiring closets.
PoE ports provide electrical current to devices through the network cables so that separate
power cords for devices such as IP phones, wireless access points, and security cameras
are unnecessary. J-EX4200 switches have partial (8 ports) PoE capability.
Partial PoE models are used in environments where, for example, only a few ports for
wireless access points or security cameras are required.
J-EX4200 Switch Models on page 5
Field-Replaceable Units in J-EX4200 Switches on page 16
Site Preparation Checklist for J-EX4200 Switches on page 57
The J-EX4200 switch is available with 24 or 48 ports and with partial Power over Ethernet
(PoE) capability. Table 4 on page 5 lists the J-EX4200 switch models.
Number of PoE-enabled Ports
First 8 ports
First 8 ports
Not applicable
Front Panel of a J-EX4200 Switch on page 6
Rear Panel of a J-EX4200 Switch on page 7
J-EX4200 Switches Hardware Overview on page 3
The J-EX4200 switch chassis is a rigid sheet-metal structure that houses the hardware
components. Table 5 on page 5 summarizes the physical specifications of the J-EX4200
switch chassis.
Value
1.75 in. (4.45 cm)
Chapter 1: Dell PowerConnect J-Series J-EX4200 Switches Overview
Power Supply
(Minimum)
320 W
320 W
320 W
5