Removing Switch Components; Removing An Ac Power Supply From A J-Ex8200 Switch - Dell PowerConnect J-EX8216 Hardware Manual

CHAPTER 13

Removing Switch Components

Removing an AC Power Supply from a J-EX8200 Switch

Removing an AC Power Supply from a J-EX8200 Switch on page 157
Removing a Fan Tray from a J-EX8216 Switch on page 159
Taking the RE Module Offline in a J-EX8216 Switch on page 161
Removing an RE Module from a J-EX8216 Switch on page 163
Taking the SF Module Offline in a J-EX8216 Switch on page 164
Removing an SF Module from a J-EX8216 Switch on page 165
Removing a Line Card from a J-EX8200 Switch on page 166
Removing a Transceiver from a J-EX Series Switch on page 168
Disconnecting a Fiber-Optic Cable from a J-EX Series Switch on page 170
Removing the Power Cord Tray from a Rack or Cabinet for a J-EX8200
Switch on page 171
The AC power supply in a J-EX8200 switch is a hot-removable and hot-insertable
field-replaceable unit (FRU). You remove AC power supplies from the front of the chassis.
CAUTION: Before you remove a power supply, ensure that you have power
supplies sufficient to power the switch left in the chassis. See "Calculating
Power Requirements for a J-EX8216 Switch" on page 85.
Before you remove an AC power supply from the switch:
Ensure you understand how to prevent ESD damage. See "Prevention of Electrostatic
Discharge Damage on J-EX Series Switches" on page 230.
Ensure that you have the following parts and tools available to remove an AC power
supply from a J-EX8200 switch chassis:
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 1
Replacement power supply or a cover panel for the power supply slot
157