Mounting A J-Ex4200 Switch - Dell PowerConnect J-EX4200 Hardware Manual

Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide
Table 30: Inventory of Components Provided with a J-EX4200 Switch (continued)
Component
Cage nuts for a round-hole rack (clip nuts), #10-32, 0.375-in. (9.525-mm), for mounting the switch in a rack
or cabinet
Cage nuts for a square-hole rack, #10-32, 0.375-in. (9.525-mm), for mounting the switch in a rack or cabinet
Phillips pan-head screws, #10-32 x 5/8-in (15.8-mm), for mounting the switch in a rack or cabinet
Phillips pan-head screws, #12-24 x 1/2-in. (12.7-mm), for mounting the switch in a rack or cabinet
Washers, #10, for mounting the switch in a rack or cabinet
RJ-45 cable and RJ-45 to DB-9 serial port adapter
Virtual Chassis cable
Virtual Chassis cable connector retainers
Dust covers for ports (for a J-EX4200-24F switch)
Quick Start installation instructions
Dell PowerConnect Safety, Environmental, and Regulatory Information
End User License Agreement
DellPowerConnect Warranty and Support Information
Registration and Software Updates for Your Dell PowerConnect J-Series Product
Open Source Code Notice
Related
Documentation

Mounting a J-EX4200 Switch

90
Mounting a J-EX4200 Switch on page 90
Installing and Connecting a J-EX4200 Switch on page 87
Connecting and Configuring a J-EX Series Switch (CLI Procedure) on page 131
Connecting and Configuring a J-EX Series Switch (J-Web Procedure) on page 133
You can mount a J-EX4200 switch:
On two posts in a 19-in. rack or cabinet by using the mounting brackets provided with
the switch.
On four posts in a 19-in. rack or cabinet by using the separately orderable four-post
rack-mount kit.
Quantity
4
4
4
4
4
1
1
2
24
1
1
1
1
1
1