Planning Power Requirements; Power Specifications For J-Ex4200 Switches; Ac Power Cord Specifications For J-Ex4200 Switches - Dell PowerConnect J-EX4200 Hardware Manual

CHAPTER 7

Planning Power Requirements

Power Specifications for J-EX4200 Switches

Table 28: AC Power Supply Electrical Specifications for J-EX4200 Switches
Item
AC input voltage
AC input line frequency
AC system current rating
Related
Documentation

AC Power Cord Specifications for J-EX4200 Switches

Power Specifications for J-EX4200 Switches on page 71
AC Power Cord Specifications for J-EX4200 Switches on page 71
Table 28 on page 71 provides the AC power supply electrical specifications for J-EX4200
switches.
Specification
100 through 240 VAC
50 through 60 Hz
4 A (for switches with 8 ports equipped for Power over Ethernet (PoE) or the
switch with 24 100Base-FX/1000Base-SX SFP ports)
AC Power Cord Specifications for J-EX4200 Switches on page 71
Power Supply in J-EX4200 Switches on page 21
General Safety Guidelines and Warnings for J-EX Series Switches on page 171
General Electrical Safety Guidelines and Warnings for J-EX Series Switches on page 197
NOTE: A jumper cable for each power supply was shipped with your switch.
If your site uses a power distribution unit (PDU) to distribute power to the
rack that houses the switch, you do not have to purchase AC power cords.
If your site does not use a PDU, you need an AC power cord for your geographical location
for each power supply on the switch. Detachable AC power cords are separately orderable
as a field-replaceable unit (FRU) item. The coupler is type C13 as described by
71