Dell PowerConnect J-EX4200 Hardware Manual page 88

Powerconnect j-series ethernet switch
Hide thumbs Also See for PowerConnect J-EX4200:
Table of Contents

Advertisement

Dell PowerConnect J-Series J-EX4200 Ethernet Switch Hardware Guide
Table 29: AC Power Cord Specifications
Country/Region
Argentina
Australia
Brazil
China
Europe (except Italy, Switzerland,
and United Kingdom)
India
Israel
Italy
Japan
North America
South Africa
Switzerland
Taiwan
United Kingdom
72
International Electrotechnical Commission (IEC) standard 60320. The plug at the male
end of the power cord fits into the power source outlet that is standard for your
geographical location.
CAUTION:
The AC power cord for the switches is intended for use with that
switch only and not for any other use.
NOTE:
In North America, AC power cords must not exceed 4.5 meters
(approximately 14.75 feet) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section 4-010(3). The cords separately orderable as FRUs are
in compliance.
Table 29 on page 72 lists AC power cord specifications provided for each country or
region.
Electrical Specification
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 60 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz or 60 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
125 VAC, 12 A, 50 Hz or 60 Hz
125 VAC, 13 A, 60 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
125 VAC, 10 A, 60 Hz
250 VAC, 10 A, 50 Hz
Plug Standard
RA/3, IRAM 2073
AS/NZ 3112
BR/3, NBR 14136
GB2099 and GB1002
CEE (7) VII
IND/3, IS 1293
IL/3G, SI 32/1971
CEI 23-16
JIS C8303
NEMA 5-15
ZA/3, SABS 164/1:1992
SEV 1011 SEV 6534/2
CNS 10917 (NEMA 5-15-P)
BS 1363/A

Advertisement

Table of Contents
loading

Table of Contents