Dhcp/Bootp Local Relay Settings; Dhcpv6 Relay; Dhcpv6 Relay Global Settings - D-Link DGS-3612G - xStack Switch Reference Manual

DHCP/BOOTP Local Relay Settings

This window is used to configure the global settings of DHCP/BOOTP local relay.
To view this window, click Administration > DHCP/BOOTP Local Relay Settings, as shown below:
The following parameters are displayed or can be configured:
Parameter
Global State
VLAN State
VLAN Name
VID List
Click Apply to implement the changes.

DHCPv6 Relay

This section contains information for configuring DHCPv6 relay, including DHCP v6 Relay Global Settings and DHCPv6 Relay
Interface Settings.

DHCPv6 Relay Global Settings

This window is used to set up the DHCPv6 relay global status.
To view this window, click Administration > DHCPv6 Relay > DHCPv6 Relay Global Settings, as shown below:
The following fields can be configured:
Parameter
Global State
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 2- 56. DHCP/BOOTP Local Relay Global Settings window
Description
Use the pull-down menu to enable or disable the status.
Use the pull-down menu to enable or disable the VLAN status.
Enter the name of VLAN.
Display the VLAN list.
Figure 2- 57. DHCPv6 Relay Global Settings window
Description
This field can be toggled between Enabled and Disabled using the pull-down menu. It is
used to enable or disable the DHCPv6 Relay service on the Switch. The default is
Disabled.
55