Bgp Community List Settings; Bgp Trap Settings - D-Link DGS-3612G - xStack Switch Reference Manual

BGP Community List Settings

This window is used to configure the matching rules for a BGP community list.
To view this window, click L3 Features > BGP > BGP Community List Settings, as shown below:
To configure BGP AS community list settings on the Switch, complete the following fields:
Parameter
Type
List Name
Click Apply to implement changes made.

BGP Trap Settings

This window is used to configure the BGP trap state.
To view this window, click L3 Features > BGP > BGP Trap Settings, as shown below:
To configure BGP trap settings on the Switch, complete the following fields:
Parameter
Peer Established
Trap State
Peer Idle Trap State
Click Apply to implement changes made.
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 4- 144. BGP Community List Settings window
Description
Toggle between Standard and Expanded. Standard configures a standard community list and
Expanded configures an expanded community list.
Enter the name of community list to be configured.
Figure 4- 145. BGP Trap Settings window
Description
Enable or disable the sending of the peer established trap.The default value is Disabled.
Enable or disable the sending of the peer idle trap. The default value is Disabled.
286