Ssh User Authentication Mode - D-Link DGS-3612G - xStack Switch Reference Manual

AES192-CBC
AES256-CBC
ARC4
Cast128-CBC
Twofish128
Twofish192
Twofish256
HMAC-SHA1
HMAC-MD5
HMAC-RSA
HMAC-DSA
Click Apply to implement changes made.

SSH User Authentication Mode

The following windows are
used to configure parameters
for users attempting to access
the Switch through SSH.
To view this window, click
Security > SSH > SSH User
Authentication Mode,
shown.
In the example window to the right, the
User Account "admin"
previously set using the User Accounts
window in the Administration folder. A
User Account MUST be set in order to set
the parameters for the SSH user. To
configure the parameters for a SSH user,
click on the hyperlinked User Name in the
Current Accounts window, which will
reveal the following window to configure.
The user may set the following parameters:
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
encryption algorithm with Cipher Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Advanced Encryption Standard AES192
encryption algorithm with Cipher Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Advanced Encryption Standard AES-256
encryption algorithm with Cipher Block Chaining. The default is Enabled.
Use the pull-down to enable or disable the Arcfour encryption algorithm with Cipher Block
Chaining. The default is Enabled.
Use the pull-down to enable or disable the Cast128 encryption algorithm with Cipher Block
Chaining. The default is Enabled.
Use the pull-down to enable or disable the twofish128 encryption algorithm. The default is
Enabled.
Use the pull-down to enable or disable the twofish192 encryption algorithm. The default is
Enabled.
Use the pull-down to enable or disable the twofish256 encryption algorithm. The default is
Enabled.
Data Integrity Algorithm
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication Code)
mechanism utilizing the Secure Hash algorithm. The default is Enabled.
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication Code)
mechanism utilizing the MD5 Message Digest encryption algorithm. The default is Enabled.
Public Key Algorithm
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication Code)
mechanism utilizing the RSA encryption algorithm. The default is Enabled.
Use the pull-down to enable or disable the HMAC (Hash for Message Authentication Code)
mechanism utilizing the Digital Signature Algorithm encryption. The default is Enabled.
as
Figure 7- 69. SSH User Authenticate Mode window
has been
Figure 7- 70. SSH User window
403