D-Link DGS-3612G - xStack Switch Reference Manual page 76

The following fields can be configured:
Parameter
VLAN Name
VID (1-4094)
Mirror Group ID
Target Port
RX Source Ports
TX Source Ports
Redirect Port
Modify Redirect
Modify Source
To remove an entry, click the corresponding Delete by VLAN icon. To search for an entry enter the appropriate information and
click the Find by VLAN button. To modify an existing entry, click the corresponding Modify button, revealing the following
window to configure:
The following fields can be configured:
Parameter
VLAN Name
VID (1-4094)
Redirect Port Action
Redirect Port
Click Apply to implement the changes. To return to the RSPAN Settings window, click the
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Description
Enter the name of the VLAN to Add, Find or Delete.
Enter the VLAN ID of the VLAN to Add, Find or Delete.
The mirror group identify that specifies which mirror session is used for the RSPAN
source function. If the mirror group is not specified when configuring the mirror ports, the
mirror group 1 will be the default group.
The mirror group target port which the mirror session used for the RSPAN source
function.
The goal of Rx source ports is to monitor as much as possible all the packets received
by the source interface or VLAN before any modification or processing is performed by
the switch. A copy of each packet received by the source is sent to the destination port
for that RSPAN session.
The goal of Tx source ports is to monitor as much as possible all the packets sent by the
source interface after all modification and processing is performed by the switch.
RSPAN redirect function will work when RSPAN is enabled and at least one RSPAN
VLAN has been configured with redirect ports.
Click on the corresponding Modify button to edit the entries.
Click on the corresponding Modify button to edit the source setting for the RSPAN
VLAN on the source switch.
Figure 2- 64. RSPAN Redirect Settings (Edit) window
Description
This is the VLAN Name that, along with the VLAN ID, identifies the VLAN which will
modify the RSPAN Entries.
This is the VLAN ID that, along with the VLAN Name, identifies the VLAN which will to
modify the RSPAN Entries.
Use the drop-down menu to select the configuration Redirect Ports Action.
Add – Add Redirect ports.
Delete – Delete Redirect ports.
RSPAN redirect function will work when RSPAN is enabled and at least one RSPAN
VLAN has been configured with redirect ports.
60
Show All RSPAN Table link.