D-Link DGS-3612G - xStack Switch Reference Manual page 196

The following parameters may be set or viewed:
Parameter
Dst. Protocol
Src. Protocol
Action
Type
Metric (0-16)
Route Map
Route Map Name
Click Apply to implement changes made. To remove an entry from the table, click its corresponding
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Description
Allows for the selection of the protocol for the destination device. Choose among RIP, OSPF,
and BGP.
Allows for the selection of the protocol for the source device. Choose between RIP, OSPF,
BGP, Static and Local.
Toggle the drop-down menu to Add or Edit the router redistribution setting being configured.
Allows for the selection of one of six methods of calculating the metric value. The user may
choose between All, Internal, External, ExtType1, ExtType2, Inter-E1, Inter-E2.
Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP
routing protocol. The user may specify a cost between 0 and 16.
Use the pull-down menu to add or delete a route map. Specify a route map, which will be
used as the criteria to determine whether to redistribute specific routes.
Enter the route map name to add or delete.
NOTE: The source protocol (Src. Protocol) entry and the destination
protocol (Dst. Protocol) entry cannot be the same.
180
under the Delete heading.