D-Link DGS-3612G - xStack Switch Reference Manual page 285

Parameter
Candidate BSR
Hash Mask Len (0-
32)
Candidate BSR
Bootstrap Period (1-
255)
Interface Name
To view the CBSR settings for an IP interface and set its BSR priority, click its corresponding Modify button, which will lead you
to the following window.
The following fields can be viewed or set:
Parameter
Interface Name
IP Address
Priority (-1 or 0-255)
Click Apply to set the priority for this IP Interface.
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Description
Enter a hash mask length, which will be used with the IP address of the candidate RP and the
multicast group address, to calculate the hash algorithm used by the router to determine which
C-RP on the PIM-SM enabled network will be the RP. The user may select a length between 0
and 32 with a default setting of 30.
Enter a time period between 1 and 255 to determine the interval the Switch will send out Boot
Strap Messages (BSM) to the PIM enabled network. The default setting is 60 seconds.
To find an IP interface on the Switch, enter the interface name into the space provided and
click Search. If found, the Interface Name will appear alone in the PIM Candidate BSR
Settings window below.
Figure 4- 128. PIM Candidate BSR Settings – Edit window
Description
This read-only field denotes the IP Interface Name to be edited for its C-BSR priority.
Denotes the IP Address of the IP Interface Name to be edited for its C-BSR priority.
Used to state the Priority of this IP Interface to become the BSR. The user may select a
priority between -1 and 0 to 255. An entry of -1 states that the interface will be disabled to be
the BSR.
269