Dns Relay Static Settings - D-Link DGS-3612G - xStack Switch Reference Manual

Secondary Name
Server
DNSR Cache Status
DNSR Static Table
State
Click Apply to implement changes made.

DNS Relay Static Settings

This window is used to set the DNS Relay Static Settings on the Switch.
To view this window, click L3 Features > DNS Relay > DNS Relay Static Settings, as shown below:
To add an entry into the DNS Relay Static Table, simply enter a Domain Name with its corresponding IP address and click Add
under the Apply heading. A successful entry will be presented in the table below, as shown in the example above. To erase an
entry from the table, click its corresponding
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Allows the entry of the IP address of a secondary domain name server (DNS).
This can be toggled between Disabled and Enabled. This determines if a DNS cache will be
enabled on the Switch.
This field can be toggled using the pull-down menu between Disabled and Enabled. This
determines if the static DNS table will be used or not.
Figure 4- 98. DNS Relay Static Settings window
under the Delete heading.
249