D-Link DGS-3612G - xStack Switch Reference Manual page 415

Web ui reference guide for layer 3 managed gigabit ethernet switch
Hide thumbs Also See for DGS-3612G - xStack Switch:
Table of Contents

Advertisement

Cache Timeout (60-
86400 sec)
RSA with RC4 128
MD5
RSA with 3DES EDE
CBC SHA
DHE DSS with 3DES
EDE CBC SHA
RSA EXPORT with
RC4 40 MD5
®
xStack
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
This field will set the time between a new key exchange between a client and a host using
the SSL function. A new SSL session is established every time the client and host go
through a key exchange. Specifying a longer timeout will allow the SSL session to reuse the
master key on future connections with that particular host, therefore speeding up the
negotiation process. The default setting is 600 seconds.
This ciphersuite combines the RSA key exchange, stream cipher RC4 encryption with 128-
bit keys and the MD5 Hash Algorithm. Use the pull-down menu to enable or disable this
ciphersuite. This field is Enabled by default.
This ciphersuite combines the RSA key exchange, CBC Block Cipher 3DES_EDE
encryption and the SHA Hash Algorithm. Use the pull-down menu to enable or disable this
ciphersuite. This field is Enabled by default.
This ciphersuite combines the DSA Diffie Hellman key exchange, CBC Block Cipher
3DES_EDE encryption and SHA Hash Algorithm. Use the pull-down menu to enable or
disable this ciphersuite. This field is Enabled by default.
This ciphersuite combines the RSA Export key exchange and stream cipher RC4 encryption
with 40-bit keys. Use the pull-down menu to enable or disable this ciphersuite. This field is
Enabled by default.
NOTE: Certain implementations concerning the function and configuration of SSL
are not available on the web-based management of this Switch and need to be
configured using the command line interface. For more information on SSL and its
functions, see the DGS-3600 Series CLI Reference Guide, located on the
documentation CD of this product.
NOTE: Enabling the SSL command will disable the web-based switch management.
To log on to the Switch again, the header of the URL must begin with https://.
Entering anything else into the address field of the Web browser will result in an
error and no authentication will be granted.
Ciphersuite
399

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents