D-Link DGS-3612G - xStack Switch Reference Manual page 248

Specify the OSPFv3 aggregation settings and click the Apply button to add or change the settings. The new settings will appear
listed in the OSPFv3 Area Aggregation Settings window. To view the table, click the
link to return to the previous window.
Use the following parameters to configure the following settings for OSPFv3 Area Aggregation Settings:
Parameter
Area ID
IPv6 Address/Prefix
Length
Advertise
LSDB Type
Click Apply to implement changes made.
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 4- 74. OSPFv3 Area Aggregation Settings - Edit window
Description
Allows the entry the OSPFv3 Area ID for which the routing information will be aggregated.
This Area ID must be previously defined on the Switch.
Specify the IPv6 network address of the aggregation.
Select Enabled or Disabled to determine whether the selected OSPFv3 Area will advertise
its summary LSDB.
The LSDB type is Summary.
232
Show All OSPFv3 Aggregation Entries