D-Link DGS-3612G - xStack Switch Reference Manual page 389

The following parameters can be configured:
Parameter
Unit
From/To
State
Aging Time (1-1440
min)
Idle Time (1-1440 min)
Block Time (0-300
sec)
Click Apply to implement the changes.
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 7- 35. WAC Port Settings window
Description
Use the drop-down menu to select the unit to configure.
Enter the range of ports to configure.
Enable or disable the WAC port settings on the specified ports.
This parameter specifies the period of time a host will keep in authenticated state after it
succeeds to authenticate. Enter a value between 0 and 1440 minutes. The default setting
is 1440 minutes. To maintain a constant Port Configuration tick the Infinite box in the WAC
configuration window.
This parameter specifies the period of time during which there is no traffic for an
authenticated host and the host will be moved back to the unauthenticated state. Enter a
value between 1 and 1440 minutes. A value of Infinite indicates the Idle state of the
authenticated host on the port will never be checked. The default setting is Infinite.
This parameter specifies the period of time a host will keep in a blocked state after it fails
to authenticate. Enter a value between 0 and 300 seconds. The default setting is 0
seconds.
373