Compound Authentication - D-Link DGS-3612G - xStack Switch Reference Manual

Parameter Description
User Name Enter a User Name of no more than 15 characters to identify the SSH user. This User Name
must be a previously configured user account on the Switch.
Auth. Mode The administrator may choose one of the following to set the authorization for users attempting
to access the Switch.
Host Based – This parameter should be chosen to use a remote SSH server for authentication
purposes. Choosing this parameter requires the user to input the following information to identify
the SSH user.
Password – This parameter should be chosen to use an administrator-defined password for
authentication. Upon entry of this parameter, the Switch will prompt the administrator for a
password, and then to re-type the password for confirmation.
Public Key – This parameter should be chosen to use the publickey on a SSH server for
authentication.
Enter an alphanumeric string of no more than 32 characters to identify the remote SSH user.
Host Name
This parameter is only used in conjunction with the Host Based choice in the Auth. Mode field.
Host IP Enter the corresponding IP address of the SSH user. This parameter is only used in conjunction
with the Host Based choice in the Auth. Mode field.
Click Apply to implement changes made.
NOTE: To set the SSH User Authentication parameters on the Switch, a User Account
must be previously configured. For more information on configuring local User Accounts on
the Switch, see the User Accounts section of this manual located in the Administration
section.

Compound Authentication

Modern networks employ many authentication methods. The Compound Authentication methods supported by this Switch include
802.1X, MAC-based Access Control (MAC), Web-based Access Control (WAC), Japan Web-based Access Control (JWAC), and
IP-MAC-Port Binding (IMPB). The Compound Authentication feature allows clients running different authentication methods to
connect to the network using the same switch port.
The Compound Authentication feature can be implemented using one of the following modes:
Any (MAC, 802.1X or WAC) Mode
In the diagram on the right, the Switch port has been
configured to allow clients to authenticate using 802.1X,
MAC, or WAC. When a client tries to connect to the network,
the Switch will try to authenticate the client using one of these
methods and if the client passes, it will be granted access to
the network.
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Host Name – Displays an alphanumeric string of no more than 31 characters to identify
the remote SSH user.
Host IP – Displays the corresponding IP address of the SSH user.
Figure 7- 71. Any Mode example
404