Static Vlan Entries - D-Link DGS-3612G - xStack Switch Reference Manual

Static VLAN Entries

This window is used to create static VLAN entries on the switch.
To view this window, click L2 Features > VLAN > Static VLAN Entries, as shown below:
The Current Static VLAN Entries window lists all previously configured VLANs by VLAN ID and VLAN Name. To delete an
existing 802.1Q VLAN, click the corresponding
To create a new 802.1Q VLAN, click the Add button, a new window will appear, as shown below: To configure the port settings
and to assign a unique name and number to the new VLAN see the table below.
To return to the Current Static VLAN Entries window, click the
802.1Q VLAN entry, click the corresponding Modify button, a new window will appear which will allow the user to configure
the port settings and assign a unique name and number to the new VLAN.
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 3- 5. Current Static VLAN Entries window
button under the Delete heading.
Figure 3- 6. Static VLAN window - Add
NOTE: The Switch supports up to 4k static VLAN entries.
NOTE: When the PVID Auto Assign function is disabled, users must
manually configure the PVID for untagged ports or the host may not
connect to the Switch correctly.
Show All Static VLAN Entries
95
link. To change an existing