Dhcpv6 Relay Interface Settings - D-Link DGS-3612G - xStack Switch Reference Manual

Hops Count (1-32)
Click Apply to implement the changes.

DHCPv6 Relay Interface Settings

This window displays the current DHCPv6 relay configurations.
To view this window, click Administration > DHCPv6 Relay > DHCPv6 Relay Interface Settings, as shown below:
To search for an entry, enter the Interface Name and click Find. To display all current entries on the Switch click View All. To
change a current entry, click the corresponding Modify button of the entry, revealing the following window to configure:
The following fields are displayed or can be configured:
Parameter
Interface Name
Hops Count (1-32)
State
Click Apply to implement the changes. To return to the DHCPv6 Relay Interface Settings window, click the
Relay Interface Entries link.
To see server addresses of an interface, click the corresponding View button:
®
xStack DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
This field allows an entry between 1 and 32 to define the maximum number of router
hops DHCPv6 messages can be forwarded across. The default hop count is 4.
Figure 2- 58. DHCPv6 Relay Interface Settings window
Figure 2- 59. DHCPv6 Relay Interface Settings (Edit) window
Description
Display the IPv6 relay interface name.
This field allows an entry between 1 and 32 to define the maximum number of router
hops DHCPv6 messages can be forwarded across. The default hop count is 4.
Use the pull-down menu to enable or disable the DHCPv6 relay on the interface.
56
Show All DHCPv6