Using Ftp To Access The Mib Files; Appendix A Supported Mib - Cisco 3845 - Security Bundle Router Software Manual

Using FTP to Access the MIB Files

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
For information about MIB support for a specific Cisco product and release, go to the MIB Locator tool
Note
at this URL:
http://tools.cisco.com/ITDIT/MIBS/MainServlet
Using FTP to Access the MIB Files
You can obtain each MIB file by using this procedure:
Make sure that your FTP client is in passive mode.
Step 1
Note
Use FTP to access the server ftp.cisco.com.
Step 2
Log in with the username anonymous.
Step 3
Enter your e-mail username when prompted for the password.
Step 4
Step 5 At the
Cisco ME 3800X and 3600X Switch Software Configuration Guide
A-2
CISCO-PROCESS-MIB
CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-VTP-MIB
DOM MIB
ENTITY-MIB
IEEE8023-LAG-MIB
HOST-RESOURCES-MIB
IF-MIB
IF-Table
IS-IS MIB
LLDP MIB
OLD-CISCO-CHASSIS-MIB
OLD-CISCO-SYS-MIB
OSPF-MIB
RFC1213-MIB (Functionality is as per the agent capabilities specified in the
CISCO-RFC1213-CAPABILITY.my.)
RMON-MIB
RMON2-MIB
SNMPv2-MIB
TDR-MIB
Some FTP clients do not support passive mode.
prompt, change directories to /pub/mibs/v1 and /pub/mibs/v2.
ftp>
Appendix A Supported MIBs
OL-23400-01