Cisco 3845 - Security Bundle Router Software Manual page 832

Configuring MPLS OAM and IP SLAs MPLS
Command
Step 9
reply-dscp-bits dscp-value
Step 10 reply-mode {ipv4 | router-alert}
Step 11
request-data-size bytes
Step 12 scan-interval minutes
Step 13 secondary-frequency {connection-loss |
timeout} frequency
Step 14
tag text
Step 15 threshold milliseconds
Step 16
timeout milliseconds
Step 17 ttl time-to-live
Step 18
exit
Step 19 exit
Cisco ME 3800X and 3600X Switch Software Configuration Guide
34-52
Chapter 34 Configuring MPLS, MPLS VPN, MPLS OAM, and EoMPLS
Purpose
(Optional) Specify the differentiated services codepoint (DSCP)
value for an echo reply packet of an IP SLAs operation. The
default value is 0.
(Optional) Specify the IP SLAs echo request reply mode as ipv4
or router-alert. The default is IPv4 UDP packet.
(Optional) Specify the protocol data size for an IP SLAs request
packet. The range is 100 to 1500; the default is 100 bytes.
(Optional) Specifies the time interval (in minutes) at which the
LSP Health Monitor checks the scan queue for BGP next hop
neighbor updates. The range is 1 to 70560; the default is 240
minutes.
(Optional) Set the secondary frequency (faster measurement
frequency) to which an IP SLAs operation should change when
a reaction condition occurs. The frequency range is 1 to 604800.
(Optional) Create a user-specified identifier for an IP SLAs
operation.
(Optional) Specify the rising threshold (hysteresis) that
generates a reaction event and stores history information for an
IP SLAs operation. The range is 0 to 2147483647; the default
is 5000 ms.
(Optional) Specify the amount of time that the IP SLAs
operation waits for a response from its request packet. The range
is 0 to 604800000; the default value is 5000 ms.
(Optional) Specify the maximum hop count for an IP SLAs echo
request packet. The range is 1 to 255.
Exit IP SLAs MPLS LSP monitor path discover configuration
mode and return to auto IP SLA MPLS parameter configuration
mode.
Exit auto IP SLA MPLS parameter configuration mode and
returns to global configuration mode.
OL-23400-01