Using Ftp To Access The Mib Files - Cisco Catalyst 2360 Software Configuration Manual

Chapter A Supported MIBs
•
•
•
•
You can access other information about MIBs and Cisco products on the Cisco web site:
Note
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

Using FTP to Access the MIB Files

You can get each MIB file by using this procedure:
Make sure that your FTP client is in passive mode.
Step 1
Note
Step 2 Use FTP to access the server ftp.cisco.com.
Step 3 Log in with the username anonymous.
Enter your e-mail username when prompted for the password.
Step 4
At the
Step 5
Use the get MIB_filename command to obtain a copy of the MIB file.
Step 6
OL-19808-01
F i n a l R e v i e w — C i s c o C o n f i d e n t i a l
SNMP-TARGET-MIB
SNMPv2-MIB
TCP-MIB
UDP-MIB
Some FTP clients do not support passive mode.
prompt, change directories to /pub/mibs/v1 and /pub/mibs/v2.
ftp>
Using FTP to Access the MIB Files
Catalyst 2360 Switch Software Configuration Guide
A-3