Using Ftp To Access The Mib Files - Cisco 3032 Software Configuration Manual

Using FTP to Access the MIB Files

Using FTP to Access the MIB Files
You can get each MIB file by using this procedure:
Step 1 Make sure that your FTP client is in passive mode.
Note
Step 2 Use FTP to access the server ftp.cisco.com.
Log in with the username anonymous.
Step 3
Enter your e-mail username when prompted for the password.
Step 4
At the
Step 5
Use the get MIB_filename command to obtain a copy of the MIB file.
Step 6
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
A-4
Some FTP clients do not support passive mode.
prompt, change directories to /pub/mibs/v1 and /pub/mibs/v2.
ftp>
Appendix A Supported MIBs
OL-12247-04