Cisco 3845 - Security Bundle Router Software Manual page 94

Configuring Cisco IOS Agents
Command
Step 8
template name [ ... name]
Step 9
Step 10
exit
Step 11
hostname name
Step 12
ip route network-number
Step 13 cns id interface num {dns-reverse | ipaddress |
mac-address} [event] [image]
or
cns id {hardware-serial | hostname | string
string | udi} [event] [image]
Cisco ME 3800X and 3600X Switch Software Configuration Guide
4-10
Chapter 4
Purpose
Specify the list of CNS connect templates in the CNS connect
profile to be applied to the switch configuration. You can
specify more than one template.
Repeat Steps 7 to 8 to specify more interface parameters and
CNS connect templates in the CNS connect profile.
Return to global configuration mode.
Enter the hostname for the switch.
(Optional) Establish a static route to the Configuration Engine
whose IP address is network-number.
(Optional) Set the unique EventID or ConfigID used by the
Configuration Engine.
For interface num, enter the type of interface–for example,
•
ethernet, group-async, loopback, or virtual-template. This
setting specifies from which interface the IP or MAC
address should be retrieved to define the unique ID.
For {dns-reverse | ipaddress | mac-address}, enter
•
dns-reverse to retrieve the hostname and assign it as the
unique ID, enter ipaddress to use the IP address, or enter
mac-address to use the MAC address as the unique ID.
(Optional) Enter event to set the ID to be the event-id value
•
used to identify the switch.
• (Optional) Enter image to set the ID to be the image-id
value used to identify the switch.
Note If both the event and image keywords are omitted, the
image-id value is used to identify the switch.
• For {hardware-serial | hostname| string string | udi},
enter hardware-serial to set the switch serial number as
the unique ID, enter hostname (the default) to select the
switch hostname as the unique ID, enter an arbitrary text
string for string string as the unique ID, or enter udi to set
the unique device identifier (UDI) as the unique ID.
Configuring Cisco IOS Configuration Engine
OL-23400-01