Displaying Traffic Control Settings - Cisco 3845 - Security Bundle Router Software Manual

Displaying Traffic Control Settings

Displaying Traffic Control Settings
Table 19-3 Commands for Displaying Traffic Control Status and Configuration
Command
show ethernet service instance number interface
interface-id mac security
show interfaces [interface-id] switchport
show storm-control [interface-id] [broadcast |
multicast | unicast]
Cisco ME 3800X and 3600X Switch Software Configuration Guide
19-12
Purpose
Displays information about MAC security configured on the service
instance.
Displays the administrative and operational status of all switching
(nonrouting) ports or the specified port, including port blocking
settings.
Displays storm control suppression levels set on all interfaces or the
specified interface for the specified traffic type or for broadcast traffic
if no traffic type is entered.
Chapter 19 Configuring Traffic Control
OL-23400-01