Cisco 3845 - Security Bundle Router Software Manual page 841

Chapter 34 Configuring MPLS, MPLS VPN, MPLS OAM, and EoMPLS
Table 34-2 Commands for Displaying MPLS and EoMPLS Information (continued)
Command
show mpls ldp neighbor
show mpls ldp parameters
show mpls prefix-map
show mpls traffic-eng autoroute
show mpls traffic-eng fast-reroute database
show mpls traffic-eng link-management
show mpls traffic-eng topology
show mpls traffic-eng tunnel
OL-23400-01
Purpose
Display the status of LDP sessions.
Display current LDP parameters.
Show the prefix map used to assign a QoS map to network prefixes that
match a standard IP access list.
Display tunnels announced to the IGP, including interface, destination,
and bandwidth.
Display the contents of the Fast Reroute (FRR) database.
Display link information about MPLS traffic engineering link
management.
Display the MPLS traffic engineering global topology as currently known
at a node.
Display information about MPLS traffic-engineering tunnels.
Cisco ME 3800X and 3600X Switch Software Configuration Guide
Monitoring and Maintaining MPLS and EoMPLS
34-61