Cisco 3845 - Security Bundle Router Software Manual page 546

Displaying QoS Information
You can use the show policy-map interface [interface-id] privileged EXEC command to show input and
output policy map statistics per classification. Statistics include the number of packets that match each
specified traffic stream, the corresponding configured action, such as policing or scheduling, and the
associated statistics.
This is an example of the output of the show policy-map interface command showing statistics for an
output policy map.
Switch# show policy-map interface gigabitethernet 0/2
GigabitEthernet0/2
Service-policy output: phb
Cisco ME 3800X and 3600X Switch Software Configuration Guide
27-58
Class-map: phb (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: cos 2
Bandwidth 1000 (kbps)
Queue-limit current-queue-depth 0 bytes
Output Queue:
Tail Packets Drop: 0
Tail Bytes Drop: 0
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Chapter 27 Configuring QoS
OL-23400-01