Configuring An Ip Slas Operation With Endpoint Discovery - Cisco 3845 - Security Bundle Router Software Manual

Configuring Ethernet CFM
Command
Step 13
ip sla schedule operation-number [ageout seconds]
[life {forever | seconds}] [recurring] [start-time
{hh:mm {:ss} [month day | day month] | pending |
now | after hh:mm:ss}]
Step 14 end
Step 15 show ip sla configuration [operation-number]
Step 16 copy running-config startup-config
To remove an IP SLAs operation, enter the no ip sla operation-number global configuration command.

Configuring an IP SLAs Operation with Endpoint Discovery

Beginning in privileged EXEC mode, follow these steps to use IP SLAs to automatically discover the
CFM endpoints for a domain and VLAN ID. You can configure ping or jitter operations to the discovered
endpoints.
Command
Step 1
configure terminal
Step 2
ip sla ethernet-monitor operation-number
Cisco ME 3800X and 3600X Switch Software Configuration Guide
32-18
Chapter 32 Configuring Ethernet OAM, CFM, and E-LMI
Purpose
Schedule the time parameters for the IP SLAs operation.
operation-number—Enter the IP SLAs operation
•
number.
• (Optional) ageout seconds—Enter the number of
seconds to keep the operation in memory when it is not
actively collecting information. The range is 0 to
2073600 seconds. The default is 0 seconds.
• (Optional) life—Set the operation to run indefinitely
(forever) or for a specific number of seconds. The
range is from 0 to 2147483647. The default is 3600
seconds (1 hour)
• (Optional) recurring—Set the probe to be
automatically scheduled every day.
• (Optional) start-time—Enter the time for the
operation to begin collecting information:
To start at a specific time, enter the hour, minute,
–
second (in 24-hour notation), and day of the
month.
– Enter pending to select no information collection
until a start time is selected.
Enter now to start the operation immediately.
–
– Enter after hh:mm:ss to show that the operation
should start after the entered time has elapsed.
Return to privileged EXEC mode.
Show the configured IP SLAs operation.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Begin configuration of an IP SLAs automatic Ethernet
operation, and enter IP SLAs Ethernet monitor
configuration mode.
OL-23400-01